Toll Free: 800-682-6528   |   Local Phone: 252-291-7808   |   Fax:  252-291-1324   |   Email:  info@aircompeq.com

CAREERS          SITE MAP          HOME

Industrial Filters - Zander - Stainless Steel Microfilters

Zander Industrial Filters - Stainless Steel Microfilters

Click on photo for a larger view

Housing Features:

  • Code 7 "Click-lock system with double "O" ring and bayonet for positively locating the element.
  • The "O" ring eliminates the possibility of particle or liquid bypass therefore insuring filtration integrity.
  • Highly-polished housing surfaces without edges or corners. (RA .8)
  • High-quality 304 (optional 316L) stainless steel construction means no fouling or corrosion and long service life.
  • Plenum chamber design improves drainage from the filter housing when used to coalesce liquids.
  • Vents tapped 1/4" FNPT.
  • May be used with depth media Series V, Z, Y, Z and A. Universally acceptable for all applications.
  • Maximum operating pressures of 232 psig (higher operating pressure housings available upon request).
  • EDPM housing seal. Other elastomers available.
  • Available as connection type: BSP, NPT, Sanitary Clamp, Milk Pipe, Welded Edge, Flange, SMS, Socket Weld.

The Elements:

The Microfilters are designed to work efficiently either on their own or in several combinations depending on the application.

Microfilter Series V:

The prefilter range mainly takes out particles from the compressed air. Thanks to the use of materials specifically developed for this duty, the user enjoys a long service life with constant efficiency. The efficiency is 99.99% of all particles of 3 micron and larger. Fine Particles smaller than 3 micron are fine particles such as dust and particularly oil aerosols which must be filtered out by a fine filter. This is where the newly developed high efficiency depth Microfilter with its various grades are used.

Microfilter Series Z:

Efficiency 99.99% at 1 micron. Oil retention down to 0.5ppm at 100 psig and 68ºF.

Microfilter Series Y:

Efficiency 99.99% at 0.01 micron. Oil retention down to 0.01ppm at 100 psig and 68ºF.

Microfilter Series X:

Efficiency 99.9999% at 0.01 micron. Oil retention down to 0.01ppm at 100 psig and 68ºF. If an even better quality of compressed air than the series X filter is required to remove oil vapors, then an adsorption type filter is required.

Microfilter Series A:

The Microfilter series A incorporates an activated carbon bed which adsorbs oil vapor. It is always preceded by a Microfilter series X to remove all oil aerosols.

 
Filter
Model **
FILTER
element
type
CAPACITY
(scfm
at 100 psig
CONNECTION*
INCHES

DIMENSIONS


A          B            C
MAX
operating
pressure

(PSI)
S02** **09T 53 1/4" 8.7 4.3 2.2 232
S05** **09T 65 3/8" 8.7 4.3 2.2 232
S07** **09T 88 1/2" 8.7 4.3 2.2 232
S09** **09T 118 3/4" 8.7 4.3 2.2 232
S11** **13T 171 1" 12.3 5.3 3 232
S12** **13T 224 1 1/4" 12.3 5.3 3 232
S13** **13T 294 1 1/2" 12.3 5.3 3 232
S14** **14T 459 2" 19.1 6.7 3.2 232
S15** **18T 677 2" 31.2 6.7 3.2 232
S18** **18T 853 2 1/2" 31.2 7.9 4.3 232
S19** **19T 1148 3" 41.6 7.9 4.3 232
 

Dimensions Chart

* DIMENSIONS ARE FOR BUTT WELD
CONNECTIONS

**Insert appropriate filter designation
(V, Z, Y, X, or A) in place of " ** "

 
 

Air Compressor Equipment Inc.
P.O. Box 3961, 1901 Baldree Road, Wilson, NC  27895
Toll Free: 800-682-6528  /  Phone: 252-291-7808  /  Fax: 252-291-1324  /  Email:  info@aircompeq.com

 

    Copyright © 2016 -Air Compressor Equipment - All Rights Reserved